There are a few things to keep in mind when adjusting the trigger on your Browning X-Bolt.
First, make sure the gun is unloaded and the chamber is empty.
Second, check the owner’s manual for specific instructions on how to adjust the trigger – every gun is slightly different.
Third, take your time and be careful not to over-tighten or damage any parts.
To adjust the trigger, start by removing the bolt from the gun and setting it aside in a safe place. Next, locate the adjusting screws on either side of the trigger assembly (these will be different depending on which model X-Bolt you have). Using a small screwdriver or Allen wrench, turn each screw until you have achieved the desired trigger pull. Be sure to test the trigger pull with the bolt in place before reassembling the gun.