The Remington 710 trigger adjustment is a fairly simple process. First, remove the magazine and make sure the gun is unloaded. Then, use a Phillips head screwdriver to remove the screws that hold the stock in place. Once the screws are removed, you can pull the stock off of the gun.
Next, use a hex wrench to loosen the screw on top of the trigger assembly. This will allow you to adjust the trigger pull weight. You can then tighten the screw to hold the adjustment in place. Finally, reattach the stock to the gun and tighten down the screws. Make sure to test out your new trigger pull weight before hitting the range!
Andy Larsson Answered question September 7, 2022