1.12K viewsGun Trigger FAQ
0
0 Comments

How to install Double Tap Trigger?

Martin Mapa Answered question September 7, 2022
0

If you’re looking to install a double tap trigger on your firearm, there are a few things you’ll need to keep in mind.

Make sure that your firearm is compatible with the double tap trigger. Most double tap triggers are designed for AR-15 style rifles, but there are a few models that will work with other types of firearms.

Once you’ve verified that your rifle is compatible, you’ll need to gather the necessary tools and supplies. You’ll need a set of allen wrenches, a drill bit, and a hand drill. Drill bits can be found at any hardware store, and allen wrenches can usually be found in the Same place.

Once you have all of your tools and supplies, you’ll need to follow the instructions that come with your double tap trigger. The installation process is usually pretty straightforward, but it’s always a good idea to read through the instructions before beginning. This will help ensure that you don’t make any mistakes and end up damaging your rifle.

Once you’ve installed your double tap trigger, you’ll need to test it to make sure it’s working properly. It’s always a good idea to do this in a safe environment, such as at a shooting range. That way, if something does go wrong, you won’t be in danger.

Martin Mapa Edited answer September 9, 2022
0

Firstly, it’s important to note that you should only install a double tap trigger if your local laws allow for it. With that being said, the installation process is relatively simple and can be done in just a few minutes.

  • To start, make sure your firearm is unloaded and remove any magazines or ammunition from the area.
  • Once you have ensured the safety of your workspace, you can begin disassembling your lower receiver according to manufacturer instructions.
  • Next, locate the trigger assembly in your lower receiver and remove it.
  • Then, take the binary trigger unit and replace the standard trigger assembly with it.
  • Make sure all components are securely tightened before moving on to the next step.
  • Now is a good time to test the trigger unit outside of the firearm to get a feel for how it works.
  • Once you are satisfied, you can then proceed to reassemble your lower receiver.
  • Again, make sure all components are properly secured before moving on.
  • Finally, load up your firearm with ammunition and magazines and give the binary trigger a go!

Remember to always practice proper gun safety and follow all local laws.

You can see an example on a Vector:

Anonymous edited answer September 9, 2022
0
  • First, make sure that your firearm is unloaded and pointed in a safe direction.
  • Then, remove the magazine and ensure that the chamber is also empty.
  • Next, use a screwdriver or coin to loosen the screws on the grip of your firearm.
  • Slide off the old grip and replace it with the double tap trigger housing.
  • Replace the screws on the grip and tighten them securely.
  • Make sure that double tap trigger is in SAFE mode by pushing down on the red safety button.
  • To install double tap trigger into your magazine well, first, remove any debris or obstructions from the area using a pick or other tool.
  • Next, align double tap trigger with the opening in your magazine well and gently push it into place until it clicks into place.

Now you’re ready to load your magazine and start shooting! Remember to always practice safe gun handling procedures.

Mike Seeklander Answered question September 7, 2022
0

Installing a double tap binary trigger is not overly complicated, but does require some basic gunsmithing skills.

The first step is to remove the lower receiver from the firearm. Once the lower receiver is removed, you will need to remove the stock trigger assembly and disconnector. Next, install the new trigger assembly into the lower receiver. Make sure that the disconnector is correctly installed and engages correctly with the trigger group. Finally, re-install the lower receiver onto the firearm and test fire to ensure everything functions correctly.

Andy Larsson Answered question September 7, 2022
Search this website

Pin It on Pinterest