It’s actually quite easy to adjust the trigger on a Remington 710. Here are the steps:
1. Remove the action from the stock by unscrewing the screws that hold it in place.
2. Pull out the action and look at where it connects to the trigger. You’ll see two small screws on either side of the connection point.
3. Use a screwdriver to loosen these screws, then adjust the trigger by twiddling them with your fingers until you have a light and smooth pull.
4. Re-tighten the screws and put the action back into the stock. You’re done!
And remember, always test your new trigger pull weight before you shoot!
