• Post category:Gun Compensators
  • Post last modified:September 10, 2022
  • Reading time:26 mins read

Affiliate Disclosure: AmmoCave.com sometimes gets paid for listings, through sponsors or affiliate programs like Lucky Gunner, Optics Planet, Brownells, Cabelas, Academy Sports & Outdoors, Rainier Arms, Palmetto State Armory, Sportsman’s Guide, Ammo.com, Ammo Man, Primary Arms, MidWayUsa, Amazon, eBay, etс. Clicking a link helps keep AmmoCave.com free, at no extra cost to you!

Authors: Each article is verified by AmmoCave's expert team. Professional hunters and gun experts write the articles. AmmoCave Team independently researches, tests, reviews, and uses recommendations from our community of gun owners. We may earn commissions from shopping links.

Note: The views and opinions expressed in this article are those of the authors and do not necessarily reflect any agency's official policy or position. The articles are for informational purposes only, share your opinions about Best Linear Compensator in the comments and join the discussions. Let's share 💬 our ammo & gun experiences together!

Ultradyne USA Athena Linear Compensator AT3 Tactical

The 17 Best Linear Compensator for AR Pistol – Editor’s Choice

ImageProductBrand
Ultradyne Athena Linear CompensatorUltradyne Athena Linear CompensatorUltradyneBUY
V Seven Helios Linear CompensatorV Seven Helios Linear CompensatorV SevenBUY
Airborne Arms Warthog Linear CompensatorAirborne Arms Warthog Linear CompensatorAirborne ArmsBUY
SLR Synergy 30 Cal Linear Hybrid Compensator Thread MD-30-24SLR Synergy 30 Cal Linear Hybrid Compensator Thread MD-30-24SLRBUY
HERA USA 556NATO Linear Compensator Threads HERA11-04-09HERA USA 556NATO Linear Compensator Threads HERA11-04-09HERA USABUY
TacFire 5.56 Linear CompensatorsTacFire 5.56 Linear CompensatorsTacFireBUY
Griffin Armament Taper Mount Linear Barrel CompensatorsGriffin Armament Taper Mount Linear Barrel CompensatorsGriffin ArmamentBUY
Dark Hour Defense Linear CompensatorDark Hour Defense Linear CompensatorDark HourBUY
HERA USA 308 Win Linear Compensator Threads HERA11-04-11HERA USA 308 Win Linear Compensator Threads HERA11-04-11HERA USABUY
Manticore Arms Afterburner Linear Compensator TPI MA-19700Manticore Arms Afterburner Linear Compensator TPI MA-19700Manticore ArmsBUY
Ultradyne UD11210 Athena Linear Compensator 350 LegendUltradyne UD11210 Athena Linear Compensator 350 LegendUltradyneBUY
TacFire 14x1 LH Linear Compensator MZ2020TacFire 14x1 LH Linear Compensator MZ2020TacFireBUY
Armaspec Linear Muzzle Brake ARM192-BLKArmaspec Linear Muzzle Brake ARM192-BLKArmaspecBUY
Ultradyne Athena Liner Compensator 14x1 LH UD10850Ultradyne Athena Liner Compensator 14x1 LH UD10850UltradyneBUY
TacFire Linear Barrel Compensator MZ1020-45ACPTacFire Linear Barrel Compensator MZ1020-45ACPTacFireBUY
Ultradyne C4 Dynamount Flip-Up Front Sight CompensatorUltradyne C4 Dynamount Flip-Up Front Sight CompensatorUltradyneBUY
Ultradyne C4 Dynamount Flip-up Rear Sight Set CompensatorUltradyne C4 Dynamount Flip-up Rear Sight Set CompensatorUltradyneBUY

A linear compensator, as a majority of muzzle devices, represents a sleeve (circular or other shapes), which should be attached to the firearm muzzle. The linear comps are a form of muzzle shrouds as well.

Why do we need a linear compensator?

The linear comps deflect some of the noise and concussion (or shock wave), from the muzzle blast forward and away from the shooters, and behind and to the sides towards other passersby. The linear compensator decreases the blast by venting high-pressure gas forward at diminished velocity; it does not have the drawbacks of a redirected muzzle blast.

Best Picks

1# Ultradyne Athena Linear Compensator

Ultradyne Athena Linear Compensator

View on OpticsPlanet

Specification

Caliber: .223 Remington; .308 Caliber
Threads per Inch: 1/2×28; 5/8×24
Gun Model: AR-15; AR-10

The Ultradyne Athena Linear Compensator is a top-of-the-line muzzle device that provides improved sound signature reduction and recoil management for your firearm. Athena is the most cost-effective way to upgrade to the Dynamount Sighting System and also features a sleek, clean appearance compared to traditional brakes. A timing nut is included for easy installation, making it a perfect choice for any shooter looking to improve the performance of their rifle.

Pros:
  • Cost-effective upgrading device for a rifle
  • Compatible with the Dynamount Sighting System
  • Appropriate Sonic Performance over recoil
  • Competition Legal
  • Fits right and is indexed simply
  • Concussion reduction
  • Allows to shoot the rifle without ear pro
  • Do not shift POI
Cons:
  • Some find the installation process difficult
  • May be too large for some rifles
  • A bit heavy on the front end

2# V Seven Helios Linear Compensator

V Seven Helios Linear Compensator

View on OpticsPlanet

Specification

Caliber: 5.56x45mm NATO; .338 Federal, .338 Winchester Magnum; 9mm Luger; .458 SOCOM
Threads per Inch: 1/2×28; 5/8×24; 1/2×36; 5/8×32
Weight: approx. 2.8 oz
Overall length: 2.75 in
Diameter: 1.25 in

The V Seven Helios Linear Compensator is the perfect muzzle device for anyone looking to improve their shooting skills. This compensator is machined from Grade 5 titanium and is available in your choice of finish, making it completely corrosion resistant. The Helios 2.75in Linear Compensator suppresses flash and reduces recoil, keeping your line of sight clear while also helping you gain better control of your weapon when firing. By directing muzzle blast and sound away from you, you can stay more focused on your targets while also enhancing your hearing protection. So if you want to fine-tune your accuracy and take your weapon skills to the next level, don’t go another day without installing a V Seven Helios Linear Compensator on your firearm.

Pros:
  • Lifetime manufacturer’s warranty
  • Corrosion-resistant coating
  • Crush washer included
  • Allows to improve firing accuracy and hearing protection
  • Fantastic fit and finish
  • Lightweight and easy to mount
  • Can be paired with any barrel length, adding about 2.2 in length to a gun
  • Diameter tucks well into most rails
Cons:
  • Some people may find the compensator to be too loud
  • May increase muzzle flash on some firearms
  • Might not be compatible with certain barrel lengths

 

3# Airborne Arms Warthog Linear Compensator

Airborne Arms Warthog Linear Compensator

View on OpticsPlanet

Specification

Length: 2.1 in
Outer Diameter: 1.2 in
Weight: 1.8 oz

This lightweight Linear Compensator lowers critical weight at the gun’s furthest point. An age-old design approach helps make the comps sturdy and well-operational. The Linear Compensators are designed with tapered throat funnels emitted gases forward towards the target. The Linear Compensators are CNC-milled and turned from a solid bar of Aerospace aluminum alloy (7075 – T6), covered with the proprietary hard-coat anodizing in Black.

Pros:
  • Durable coating
  • Weighs only 1.8 ounces
  • Made from solid bar stock 7075-T6 Aluminum
  • 1.2in Outer Diameter fits even the slimmest of handguards
  • Proprietary Hardcoat Black Anodized
Cons:
  • May not be ideal for all firearms
  • Installation can be complicated for some users

 

4# SLR Synergy 30 Cal Linear Hybrid Compensator Thread MD-30-24

SLR Synergy 30 Cal Linear Hybrid Compensator Thread MD-30-24

View on OpticsPlanet

Specification

Caliber: .30 Caliber
Threads per Inch: 5/8×24
Length: 2 in
Weight: 3.8 oz
Diameter: 1.25 in

SLR constructed Synergy Linear Hybrid Compensators for 30 Caliber (308/300BLK), which add only 1.52 inches to the barrel. The comps are manufactured from Stainless Steel with Melonite coating in Blasted (Grey) color. The device integrates Melonite Core with Titanium Sleeve.

Pros:
  • Comes with a crush washer
  • Performs well
  • Minimizes muzzle rise
  • Puts the recoil majority straight back in a much smoother motion
  • The silver color matches the stainless color barrel perfectly
Cons:
  • Expensive
  • May not be available in stores

 

5# HERA USA 223 Rem/556NATO Linear Compensator Threads HERA11-04-09

HERA USA 556NATO Linear Compensator Threads HERA11-04-09

View on OpticsPlanet

Specification

Caliber: 5.56x45mm NATO, .223 Remington
Threads per Inch: 1/2 X 28
Overall length: 3.55 in
Outside diameter: 1.226 in

The Linear Compensator is good for AR-pattern rifles, directing muzzle flash and sound forward, away from the shooters. The shots are still loud enough and need hearing protection, but they are less than without comp. This Linear Compensator does not require a crush washer or locking nut, just screw directly snug up to the barrel with a bit of blue thread lock and it will stay in place.

Pros:
  • Made in the USA
  • Well constructed
  • Fits under a 1.3-in diameter handguard without effort
  • Nice fireball effect profile while firing
  • Easy to install
  • The graphite color coating is evenly applied, wear-resistant
Cons:
  • May be too heavy for some users
  • Not as reliable as other products on the market

 

6# TacFire 5.56 1/2X28 Linear Compensators

TacFire 5.56 Linear Compensators

View on OpticsPlanet

Specification

Caliber: 5.56x45mm NATO; 308 Caliber; 9mm Luger
Weight: 3.5 oz; 3.7 oz; 2.9 oz;
Threads per Inch: 1/2X28; 5/8×24; 1/2×36
Length: 2.26 in
Outer Diameter: 0.87 in

When you need an edge on the competition, look no further than the TacFire 5.56 1/2X28 Linear Compensator. These high-quality compensators are machined from durable steel for long-lasting performance and are designed to redirect sound and concussion away from the shooter for a more comfortable shooting experience. They also feature a crush washer for easy installation and a sleek, black finish that will match your AR-15 perfectly. Get the TacFire 5.56 1/2X28 Linear Compensator today and take your shooting to the next level!

Pros:
  • Made in the USA
  • No need for timing
  • Fits properly
  • Looks stylish
  • Comes with Crush Washer
  • Good for AR pistol build and rifles with short barrels
Cons:
  • The finish wears slightly
  • Timing may be needed

 

7# Griffin Armament Taper Mount Linear Barrel Compensators

Griffin Armament Taper Mount Linear Barrel Compensators

View on OpticsPlanet

Specification

Length: 2.27 in
Outer Diameter: 1.075 in
Weight: 2.5 oz

Griffin first designed linear comps for the Gate-LOK series of suppressors, then for Taper Mount ones as well. The billet is machined from Stainless steel (17-4) in two pieces, which are precision TIG welded together to ensure the largest possible inner expansion chamber in a Taper Mount. The welded front cap is outfitted with gas jet nozzles protected by a wire cutter shroud to direct the concussive blast forward and away from the shooters and nearest passersby. The device is pre-drilled with a 3-mm hole for pinning and welding, fitting Sportsman, Recce, Paladin, EXPLORER, and Griffin Pistol Silencers with Taper Mount accessories.

Pros:
  • Can be used alone or with a suppressor
  • Sturdy lock-up
  • Ensures the lowest concussion
  • Can be paired with the Taper Mount Thread Protector
  • Included Shim set
  • Free of wear prone geometry
  • Appropriate even for hard use
Cons:
  • May not work with all factory-threaded barrel
  • High cost
  • Sometimes hard to find

 

8# Dark Hour Defense Linear Compensator

Dark Hour Defense Linear Compensator

View on OpticsPlanet

Specification

Caliber: 5.56x45mm NATO; 6.8mm Remington SPC, 7.62x39mm
Threads per Inch: 1/2 X 28; 5/8 X 24
Length: 2.6 in
Weight: 5 oz
Diameter: 1.25 in

These comps are constructed for CQB-type firearms and can be used with any barrel length. The Linear Comp is manufactured from Stainless Steel (416) with a black Melonite coating. The Linear Compensator fairly suppresses flash and mitigates recoil, directing muzzle blast and sound signature forward, away from the shooters. Small diameter tucks well into most rails and handguards, adding about 2.05 inches to the overall gun length.

Pros:
  • Comes with Crush Washer
  • Looks nice on the rifle
  • Helps tremendously porting the gases forward
  • Easy to install
  • No timing is required
Cons:
  • May rust over time
  • May not be as durable as others

 

9# HERA USA 308 Win Linear Compensator Threads HERA11-04-11

HERA USA 308 Win Linear Compensator Threads HERA11-04-11

View on OpticsPlanet

Specification

Caliber: .308 Winchester
Threads per Inch: 5/8 X 24
Length: 4.0 in

The main application of the Linear Compensator is to reduce noise. These comps are Generation 2 devices with 30% less weight and a reduced outer diameter for great fit under Hera IRS handguard systems.

The inside construction with 6 separate expansion chambers leads to blast and noise straightforwardly to increase shooting comfort and diminish noise.

Pros:
  • Made in the USA
  • Well constructed
  • Appropriate for use on short-barreled rifles
  • Not heavy: the weight does not throw the balance off at all
  • Easy to install
Cons:
  • Doesn’t work well with all calibers
  • Can be a bit noisy

 

10# Manticore Arms Afterburner Linear Compensator TPI MA-19700

Manticore Arms Afterburner Linear Compensator TPI MA-19700

View on OpticsPlanet

Specification

Length: 2.25 in
Weight: 3.4 oz
Diameter: 1 in
Threads per Inch: 1/2×28

Looking for a slim and lightweight linear compensator that packs a punch? Look no further than the Manticore Arms Afterburner Linear Compensator. Measuring just 1 inch in diameter and 2.25 inches in length, this compensator is designed to give you the same performance as larger, bulkier models on the market. And thanks to its internal threading, you can easily attach optional muzzle ends like flash hiders and compensator tips. Plus, the Afterburner will fit inside the Manticore Arms AR-15 Transformer Forend. The best part? It’s marked “MA” and “USA” to denote 922r compliance and comes with a crush washer and wrench flats for easy installation. So don’t wait any longer, pick up a Manticore Arms Afterburner Linear Compensator today!

Pros:
  • Slim profile
  • Marked “MA” and “USA” to denote 922r compliance
  • Included a crush washer with a wrench
  • Simple installation
Cons:
  • May not provide the same performance as bulkier models
  • There is no mention of how this compensator performs under sustained fire

 

11# Ultradyne UD11210 Athena Linear Compensator 350 Legend Black Nitride

Ultradyne UD11210 Athena Linear Compensator 350 Legend

View on OpticsPlanet

Specification

Threads per Inch: 1/2×28

The Ultradyne UD11210 Athena Linear Compensator is the perfect way to upgrade your rifle with the Dynamount Sighting System. This linear compensator gives your rifle a cleaner appearance and provides optimized sonic performance over recoil. The timing nut makes installation easy, so you can enjoy the benefits of this product right away. Don’t miss out on this must-have accessory for your rifle. Order the Ultradyne UD11210 Athena Linear Compensator today!

Pros:
  • Clean appearance, sleek look compared to traditional brakes
  • Cost-effective method to upgrade a rifle to the Dynamount Sighting System
  • Simple installation due to the included timing nut
  • A timing nut is included for easy installation
Cons:
  • May not be compatible with all rifle models
  • Some shooters find this model too bulky

 

12# TacFire 7.62X39 14×1 LH Linear Compensator MZ2020

TacFire 14x1 LH Linear Compensator MZ2020

View on OpticsPlanet

Specification

Caliber: 7.62x39mm
Threads per Inch: M14x1 LH
Length: 2.3 in
Weight: 3.4 oz
Diameter: 0.87 in

This Linear Compensator is constructed for the AK platforms with a 1/2×28 thread pitch. The special design with surface fluting decreases weight, creating a lower profile and clean construction. Tacfire crafted the linear comps from Steel, covered with Nitride in Black color.

Pros:
  • Quality finish and thread
  • Made in the USA
  • Affordable price
  • Fit perfectly
  • Changes effectively the noise
  • Diminishes perceived recoil
  • Redirects sound and concussion away from the shooters
Cons:
  • Some shooters don’t like the design
  • May not be suitable for AK rifles

 

13# Armaspec Linear Muzzle Brake ARM192-BLK

Armaspec Linear Muzzle Brake ARM192-BLK

View on OpticsPlanet

Specification

Overall weight: 5.36 oz
Length: 2.82 in

The Linear Muzzle Brake is a combination of the blast shield and the muzzle brake core with diverse initial chambers, which pass combustion gases inside them for a longer period of time effectively diminishing felt recoil and directing the sound forward away from the shooters.

The comps are equipped with a blast shield to decrease the blast, making the firing more comfortable in the prone position or close proximity to others.

Pros:
  • Patents Pending construction
  • Good fit and finish
  • Friendly for prone position shooting
  • Port holes index properly over the narrower top of the inner brake allowing gas to vent upwards
Cons:
  • The flash generates a bit obnoxious sound
  • A bit heavy

 

14# Ultradyne Athena Liner Compensator 14×1 LH UD10850

Ultradyne Athena Liner Compensator 14x1 LH UD10850

View on OpticsPlanet

Specification

Caliber: 7.62x39mm
Length: 2 in
Outer Diameter: 1.1 in
Weight: 114 g
Threads per Inch: M14x1 LH

The Ultradyne Athena Liner Compensator is the standard in linear compensators and is now available to AK enthusiasts. Gases have been vented forward to create a reduced sound signature by sending a lower percent of the blast back towards the shooter, optimizing sonic performance over recoil. The Athena gives a cleaner appearance for a sleek look compared to a traditional compensator. A timing nut is included for easy installation.

Pros:
  • Optimizes sonic performance over recoil
  • Features a smooth look compared to conventional compensators
  • Convenient mounting due to the included timing nut
  • Stylish design
Cons:
  • Installation can be complicated
  • Not as reliable as others

 

15# TacFire 5/8×24 Linear Barrel Compensator MZ1020-45ACP

TacFire Linear Barrel Compensator MZ1020-45ACP

View on OpticsPlanet

Specification

Caliber: .45 ACP
Threads per Inch: 5/8×24
Overall Length: 2.25 in (56.6 mm)
Outer Diameter: 0.95 in (24.15 mm)
Exit Diameter: 0.49 in
Net Weight: 3.8 oz

These Linear Compensators are designed for Bolt Action Rifles. The linear compensator is outfitted with six sleek ports to redirect sound and concussion away from the shooters and down-range. The fluting on the brake is not only nice-looking but also decreases weight. The comps are manufactured from Steel, covered with Black Nitride.

Pros:
  • Made in the USA
  • Low profile and a clean look due to the fluting on the brake
  • Comes with a crush washer
  • Good for hunting or shooting at the indoor firing range
  • Friendly to the nearest shooters’ ears
Cons:
  • The design may not appeal to everyone
  • High price

 

16# Ultradyne C4 Dynamount Flip-Up Front Sight Compensator

Ultradyne C4 Dynamount Flip-Up Front Sight Compensator

View on OpticsPlanet

If you’re looking for the best in terms of accuracy and precision, then you need to check out the Ultradyne C4 Dynamount Front Sight / Athena Linear Compensator Combo. This amazing combo features the innovative Dynamount System which ensures superior accuracy by mounting to the barrel instead of a free-floating handguard. Additionally, the purely concentric circle-within-circle sight picture of the C4 Sight System allows the shooter to see the target not cover it, enables faster sight acquisition, reduces the effect of parallax and gives the ability to consistently shoot accurately at close targets or extreme distances. Increased flexibility by having windage and elevation along with the ability to index at 45 or 90 degrees makes this sight the best on the market. So don’t settle for anything less than the best, pick up your Ultradyne C4 Dynamount Front Sight / Athena Linear Compensator Combo today!

Pros:
  • Superior accuracy
  • Mounts to the barrel instead of a handguard
  • Purely concentric circle-within-circle sight picture
  • Faster sight acquisition
  • Reduced effect of parallax
  • Ability to shoot at close targets or extreme distances
Cons:
  • Can be expensive
  • May require gunsmith installation

 

17# Ultradyne C4 Dynamount Flip-up Front/Rear Sight Set Compensator

Ultradyne C4 Dynamount Flip-up Rear Sight Set Compensator

View on OpticsPlanet

Shooters, take notice – the Ultradyne C4 Dynamount Flip-Up Front Sight Compensator is revolutionizing iron sights. The Athena 3-Piece Combo features the innovative Dynamount Front Sight, the C4 Rear Sight along with the Athena Linear Compensator. The key is the Dynamount System which ensures superior accuracy by mounting to the barrel instead of a free-floating handguard. This gives you an extended sight radius for more precise aiming. The C4 Rear Sight boasts a ballistically calibrated elevation system that adjusts in 50-yard increments from 200 to 600 yards. And the dual aperture sighting system offers quick target acquisition in any light conditions. In tandem, the C4 Sight System is changing the way shooters think about iron sights. Get on target fast and hit your mark with Ultradyne.

Pros:
  • Superior accuracy
  • Extended sight radius
  • Ballistically calibrated elevation system
  • Quick target acquisition
Cons:
  • May be too heavy for some shooters
  • May require adjustment

 

FAQ

Are linear compensators the same as muzzle brakes?
Both devices vary the character of gas diverting: muzzle brake deflects the gases to the side and rearward, while linear comp redirects the gases forward.
Do linear compensators hide flash?
Many contemporary muzzle devices are multi-purposed, frequently excluding more than just one issue. Linear compensators first of all redirect muzzle blast forward, they also reflect the noise away from the shooters, but they don’t diminish flash, this task is for flash hiders.
What's a better muzzle brake or compensator?
The key task of muzzle brakes is to minimize recoil and only lightly to reduce muzzle movement; meanwhile, the compensators do the exact opposite. The comps are excellent for calibers without much recoil, as they allow the shooter to stay on target for faster and more accurate follow-up shots.
Is the muzzle shroud different from a barrel shroud?
The main difference between these two devices is that a muzzle shroud merely encircles the muzzle (far barrel end). Both shrouds are similar and can be flash suppressors without circumferential slots.
What is the difference between the sound suppressor and muzzle shroud?
The distinction between a muzzle shroud and a silencer is in their basic function: as the first device only redirects sound to ensure the shooters’ comfort, diminishing the concussion to a comfy level, meanwhile the second one suppresses the sound.

Conclusion

Be aware that linear compensators don’t make the rifles quieter, they just relocate the blast forward, they do not reduce or disguise flash for tactical purposes as well. The linear compensator is the best solution for short-barreled pistols. There will be an insignificant effect on a 20-inch barreled AR, but it will be much more efficient on a 10.3-inch barrel.

The linear comps make firing from rifle-style guns or short-barreled rifles a lot more convenient; they sound much less noisy than muzzle brakes. Armaspec Linear Muzzle Brake ARM192-BLK is outfitted with a blast shield to minimize the blast, making the shooting more comfortable in the prone position.

Tags: #best linear compensator / #best linear compensator for ar pistol / #best linear compensator for sbr / #best 308 linear compensator / #best 9 mm linear compensator

0 0 votes
Article Rating
Subscribe
Notify of
0 Comments
Inline Feedbacks
View all comments