Authors: Each article is verified by AmmoCave's expert team. Professional hunters, firearm trainers, gunsmiths, and gun experts write the articles. AmmoCave Team independently researches, tests, reviews, and uses recommendations from our community of gun owners. We may earn commissions from shopping links.
Note: The views and opinions expressed in this article are those of the authors and do not necessarily reflect any agency's official policy or position. The articles are for informational purposes only, share your opinions about Best AR Pistol Grip 2023 in the comments and join the discussions. Let's share 💬 our ammo & gun experiences together!
Table of Contents
Our Selection 27 Best AR Pistol Grips – Editor’s Choice
Image
Product
Brand
FAB Defense Rubberized Pistol Grip for M16/M4/AR-15
FAB Defense
FAB Defense Ergonomic Folding Pistol Grip for M16/M4/AR15
FAB Defense
FAB Defense Ergonomic Pistol Grip for AR15/M16/M4
FAB Defense
Hogue Overmold AR-15 Rubber Gun Grip 15000
Hogue
Magpul MOE-Plus AR15 Gun Grip
Magpul
MDT AR-15 Pistol Grip
MDT
Reptilia CQG Pistol Grip For AR-15/SR-25/SIG
Reptilia
FAB Defense Gradus Rubberized Ergonomic AR Pistol Grip
FAB Defense
FAB Defense Gradus Rubberized Ergonomic Pistol Grip
FAB Defense
Leapers UTG AR15/M16 Ergonomic Sniper Pistol Hand Grip RB-TPG172B
Leapers
MFT Engage AR15/M16 Pistol Grip
MFT
Ergo Grip AR15/M16 Tactical Deluxe Rifle Grip 4045-BK
Ergo
Tyrant Designs MOD v2 AR Pistol Grip
Tyrant Designs
Hogue AR-15/M-16 Rubber Gun Grip 15003
Hogue
Hogue AR15/M16 G-10 Gun Grip
Hogue
Daniel Defense Overmolded Pistol Grip
Daniel Defense
Stark ONE AR-15 Pistol Grip With CR123A Battery Storage
One-piece reinforced polymer is constructed with wrap-around rubber over-molding and texturing for an ergonomic, secure grip and better firearm handling.
Gun Model: M16, M4, AR-15
Width: 33 mm, 1.3 in
Weight: 0.287 lb, 130 g
Height: 4.57 in, 116 mm
Length: 83 mm, 3.27 in
These AR15 Pistol Grips are designed with three over-molded textures: alligator pattern for the front fingers, rib studded at palm, and moon surface for the sides.
Video review
Pros
Three ergonomically designed textures for the best grip dependability
Integrated quickly-accessible storage compartment for batteries or small items
Made of high-quality materials
Improves grip even when wet
Fingerswells
Backstrap shape
Correct angle for manipulating safety with thumb
Higher, firmer grasp due to the extended beavertail.
Cons
Storage cap difficult to remove or replace when grip is cold
Gun Model: M16, M4, AR-15
Length: 83 mm, 3.27 in
Width: 33 mm, 1.3 in
Height: 56 mm, 2.2 in
Weight: 0.249 lb, 113 g
The Folding Grip with an ergonomic non-slip design and finger grooves, a backstrap shape to provide a more reliable grip.The Pistol Grip folds from a vertical to a horizontal position and back with one button push, making it compact and convenient to fit in a case or on a rack.The grip is outfitted with a readily accessible storage compartment with a tight-sealing hinged door.
Video review
Pros
Easier concealment for undercover operations
Enlarged beavertail ensures firmer hold for better firearm handling
Makes the rifle more compact
Lightweight
Inexpensive
Solid lock up
Simple to install
Cons
Decreased storage space compared to the fixed model
The mold marks – plastic fins haven’t been removed during manufacturing
Too big at the bottom for a normal-sized hand and the pinky gets nearly no grip, the back of the grip is too big compared to the front
The button to fold the grip has a sharp edge and is under the thumb, it should have at the least been rounded
The standard locking washer cannot be used because of a small counterbore for the mounting bolt head
The bottom storage cover has no seal, the release is recessed so a tool is needed to open it (the plastic on the release tab is soft, using a metal object, it will get damaged)
Gun Model: SR-25, AR-10, M16, M4, AR-15
Length: 83 mm, 3.27 in
Width: 33 mm, 1.3 in
Height: 127 mm, 5 in
Weight: 0.212 lb, 96 g
The FAB Pistol Grips for AR15/M16/M4 with finger swells and a backstrap shape are crafted from reinforced plastic composite, constructed to prevent the wrist fatigue associated with other aftermarket grips.The grips are equipped with a storage area with a hinged door at the bottom for quick access.
Video review
Pros
Built-in prolonged beavertail delivers higher and firmer rifle hold, ensuring better firearm control while shooting
Ergonomic non-slip design: texturized grip minimizes slipping if it is wet
Target acquisition
Light and durable
Comfortable grip angle
Storage area
Control and steady feel
Fits a variety of platforms
Cons
Hardware for installation is not included: the package lacked the necessary screw to attach to the lower receiver
Too big for smaller hands
Does not fit loose side to side front to back
The storage compartment button can’t be pushed with just a finger
The Cobblestone-pattern texturing grip is designed with finger grooves, delivering a relaxed yet secure grip even while wearing gloves either in cold or wet weather.
Video review
Pros
Easy-to-install grip
The Overmolded rubber is a soft, long-lasting, sturdy enough thermoplastic elastomer
Non-slip, non-irritating stippled grip with or without gloves on
Virtually impervious to all oils and solvents associated with firearms
Gun Model: AR-15
Weight: 0.19 lb
Height: 4.125 in
Width: 1.5 in
The Standard AR15 interface grip features Polymer (a one-piece reinforced) inside core with Santoprene tactile over mold to ensure maximum comfort and strength. The grip angle isn’t specific, but it is similar to the Mil-spec AR-15 grip.
Video review
Pros
Convenient palm swell for better hand fit: the palm swells feel great in the hand and are not too large
Smart ergonomics for both right and left-handed shooters
An anti-slip and solid rifle grip due to the lightly textured and grooved rubber over-molding
Super easy to install
Fits perfectly flush with the LSS chassis gen 2 on the sides
There is a little shelf for your thumb on both sides
Cons
As it’s rubber, the lint and dust cling to it pretty easily
The CQG grip features an enhanced beaver tail design and anti-slip front and rear texture, allowing shooters to place their hands higher on the grip for better control and comfort. The Pistol Grip with pronounced vertical grip angle is manufactured of Reinforced Nylon, including all mounting hardware.
Video review
Pros
Full lifetime warranty against manufacturer defects
Improves ergonomics of AR15 pistols, compact-sized short-barreled rifles, and pistol caliber carbines
Durable and compact
Lightweight
Comfortable and recoil specific, preventing hand fatigue
Good size
More vertical grip angle
Comfortable and recoil specific, preventing hand fatigue
Awesome for shooters with average or small hands
Cons
For large hands the grip feels like a kiddy toy: it’s impossible to use this grip for larger caliber weapon
The Pistol Grip is equipped with a reinforced polymer core and textured rubber over-mold.
The grip is available in a flat configuration (FBV) or with an AR-style beavertail with a Rubberized Finish in Black, Olive Drab Green, or Flat Dark Earth color.
Video review
Pros
Relieves pressure on the hand by equally distributing the force applied on the grip surface
Great for precision shooting & CQB due to the 15-degree reduced grip angle
Slim ergonomic design with a curved backstrap
No modifications are necessary
Looks sweet
Feels better in the hand than OEM
The Beavertail version fits better
Cons
The bolts would bottom out before the grip got tight
The slim ergonomic Pistol Grip is constructed with a 15-degree profile, reinforced polymer core with textured rubber over-mold, and a curved back strap to provide a purposeful comfortable grip. The main grip materials are Polymer and Rubber, covered with a Rubberized Finish.
Video review
Pros
Better firearm control at any distance or an intensive CQB drill
Relieves stress on the hand equally distributing the force applied on the grip surface
Minimalist grip and lightweight
The molded rubber feels great
Fits a bolt action chassis rifle perfectly
The texture is comfortable
The fit and finish are excellent
Cons
The version without the beavertail: expected the reduced grip would be more evident, but it’s the same angle as other grips, just taken the angle out at the grip bottom
Doesn’t fit the AR15 lower flush at the rear
Full 5/16-inch miss on the upper: looks like they just removed the beaver tail off a beavertail grip
The grip doesn’t match up to the receiver without a beavertail well, as there is a huge shelf that shouldn’t be there
Height: 4.83 in
Weight: 5.1 oz
Gun Model: AR-15, M16
The Polymer Molded Pistol Hand Grips are Ambidextrous with a hi-tech anti-slip texture for firm handling, ensuring great Overall Control and Most Reliable Performance.
Video review
Pros
Ambidextrous Palm Swell
Thumb Rest
Trigger Finger Shelf for Optimal Control
Impact-Resistant Advanced Polymer
Creative Ergonomic Design with Angled Grip
Concealed Storage for Accessories
Fits the handwell
Solid grip
Decent price
Easy to install
Cons
Hole too deep for safety spring
No grip screw
May not fit with aftermarket Ambi – switch
The edges of the grip compartment are very sharp/pointy
Sloppy design: the included sliding floor plate has no tension on it and slides right out if the muzzle is pointed upward, so easy to lose
The same panel does not fit the grip neatly, leaving some awkward gaps
Gun Model: M16, AR-15 (.223 and .308)
Hand: Ambidextrous
The Tactical Pistol Grip with an over-molded rubber-like surface delivers a more positive grip, enhancing firearm control. The integrated rear upper extension supports the web of the hand; the grip fits medium to large hands best.
Video review
Pros
Heavy texture and ergonomically correct finger grooves ensure reliable grip in cold or wet weather
Gun Model: AR-10, AR-15
Length: 4.125 in
Weight: 3.95 oz
Gun Type: Rifle
Width: 0.985 in
The Aluminum Pistol Grip is equipped with a beveled edge near the trigger guard, and rubber front and back straps for more comfort. The grip comes with a ninstall kit.
Video review
Pros
Chamfered edges for a smooth feel
Resistant to different temperatures
Deep ribbing for easy installation
Custom look
Rubber Inserts
Cons
Bulky
Not ergonomically friendly: the metal digs into the hand at some angles
Inconvenient mounting
Too easy to scratch the anodizing while installing it
High: 4.25 in
Width: 2 in
Thickness: 1.38 in
Weight: 0.20 lb
This new DD pistol grip is an update of the old standby A2 with enhanced ergonomics and handling. The pistol grip is equipped with an oversized trigger guard, covering the gap between the grip and lower receiver making a comfy grip with or without gloves.
Video review
Pros
Shares the angle of the classic 1911 pistol for the most natural hand position and comfortable feel
The inner trigger guard doesn’t need a rolling pin that simplifies installation, preventing the lower receiver damage
Nice angle
Unique grip texture
A soft touch over-molding section improves grip, in wet or dry weather
The perfect blend of stickiness and yet not overly soft
The grip features a one-piece billet design and is crafted fromAircraft Grade Aluminum (6061-T6) with Hard Coat Anodized Finish (Type III), with standard Carbon Fiber and G10 insert options. The AR15 grip includes Grip Screw.
Video review
Pros
Vertical slots for added texture
Very cleanly machined
Fantastic quality
Fits nicely on an AR pistol
Has a decent weight to balance in the hand
Cons
Deceptive lybulky
The grip angle is like an A2 grip, maybe even slightly more angled
The Pistol Grip is outfitted with a trigger guard, the mounting bolt, and a star washer. There are 2 models available in Olive Drab or Flat Dark Earth color.
Pros
Great price
Ergonomics is better than expected
Thepolymer seems durable
The grip and flared trigger guard are easy to install and come with all the hardware needed
The tactical Full-Size pistol grip has textured finger swells and grooved backstraps, ensuring a positive non-slip grip surface with wet or gloved hands. The Full-Size grip delivers more control while reloading and shooting.
Video review
Pros
Useful and secure watertight storage compartment with plug retention for one-handed storage access
A customization foam storage sled with a quick access tab decreases all rattle
The Pistol Grip ensures premium comfort and stability for the AR platform. The polymer grip integrates an improved textured surface and palm swell for an intuitive fit.
The Outdoors Enforcer Pistol Grip with a skeletonized body allows it to mitigate recoil and reverb better than traditional designs. The Long Gun Grips are CNC Machined from Aircraft Grade Aluminum to provide a stronger and more durable grip.
Video review
Pros
Quick and easy mounting
Installing is a breeze
Looks nice
Flawless finish
Solid aluminum
Color match
Same size as the original
Cons
Heavy
Poor fitment: doesn’t mount or line up properly with any of the lowers (billet or forged)
The Ultralight Series Pistol Grip is made ofAluminum (T6) with an Anodized finish. There are 2 models available in Anodized Purple and black colors. The grip features a skeletonized Cut Out Design with excellent width to improve trigger pull.
Pros
Lightweight
Rock-solid
Ergonomic comfortable Finger Grooves
Matches the look of skeletonized upper and lower
The finger grooves are comfortable in the hand
Cons
Doesn’t come with the necessary hardware to install
The AR-15 Pistol Grip Mod 0with decreased angle and enhanced ergonomics delivers better trigger control.The Polymer grip with Checkered texturing is outfitted optional for mounting inserts: an enlarged modular insert closes the gap between the trigger guard and pistol grip, and a smooth modular insert can be used with some rifles with a larger built-in trigger guard.
Pros
High-quality impact-resistant polymers
Easy installation
Hinged trap door forinside storage compartment with a water-resistant rubber gasket
The Ergonomic Pistol Grips allow comfortable grip, resulting in reliable AR15 handling.Daniel Defense Overmolded Pistol Grip, Timber Creek Outdoors Enforcer AR Pistol Grip, Stark ONE AR-15 Pistol Grip SE1-AR-BL-AA are bought by 12-14 purchasers, getting 4.8 and 4.9 ratings.Ergo Grip AR15/M16 Tactical Deluxe Rifle Grip 4045-BK and FAB Defense Rubberized Pistol Grip For M16/M4/AR-15 have the same rating (4.7) and almost similar price.
Tags: #best ar 15 pistol grip / #best ar-15 pistol grip / #best ar pistol grip / #best grip for ar pistol
This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Cookie settingsACCEPT
Privacy & Cookies Policy
Privacy Overview
This website uses cookies to improve your experience while you navigate through the website. Out of these cookies, the cookies that are categorized as necessary are stored on your browser as they are essential for the working of basic functionalities of the website. We also use third-party cookies that help us analyze and understand how you use this website. These cookies will be stored in your browser only with your consent. You also have the option to opt-out of these cookies. But opting out of some of these cookies may have an effect on your browsing experience.
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.
